Beschreibung
Stage6 water pump with increased flow Derbi Black
Water pump with extra high flow rate from Stage6 for Derbi Euro 3 and Euro 4 - improves cooling if you want to continue using a mechanical water pump.
Stage6 water pump with extra high flow rate
Avoiding an overheated engine is particularly important for tuned 50cc engines. Installing the Stage6 high flow water pump for Derbi can significantly improve the engine's cooling system.
The water pump kit contains a colored anodized spacer for the cover, a drive shaft, an oversize impeller, O-rings and screws.
The base plate for the cover is available in different colors, so that you can upgrade your motorcycle not only in terms of performance, but also visually.
Benefits of Stage6 water pump with increased flow rate:
- Less maintenance: high-precision machined stainless steel water pump shaft = Longer service life than OEM part as it is not affected by corrosion.
- Increased cooling capacity: Oversized, CNC-machined and anodized impeller to increase cooling volume, which is absolutely essential for the small radiators typically installed on 50cc bikes.
Individual customizing: CNC-milled and colour-anodized base plate for perfect color customizing.
- Perfect seal: The O-rings ensure a perfect seal; no paper gasket or sealant is required.
Installation stage6 water pump with extra high flow Derbi E3 / E4
Installing the Stage6 water pump for Derbi is very easy: First drain the coolant, remove the cover of the original water pump and the impeller. You should also check the condition of the water pump seal and replace it if necessary.
During installation, insert the water pump shaft with the Stage6 impeller, insert the base plate for the cover with O-rings and fit the water pump cover (original or Stage6). Then connect the Derbi radiator hoses and bleed the cooling system. We recommend replacing the old coolant with new one.
You have two options for the water pump cover:
- Use the original Derbi water pump cover
- Use the Stage6 R/T water pump cover made of CNC aluminum to improve cooling even more
Details Water pump Stage6 Derbi :
- Base plate for cover: Black
- Supplied with the screws and O-rings required for installation
- For Derbi Euro 3
- For Derbi Euro 4
Wasserpumpe für Motorrad und Roller
Die Wasserpumpe ist ein entscheidender Bestandteil eines wassergekühlten Motors. Sie sorgt dafür, dass das Kühlwasser zwischen Motor und Kühler zirkuliert, um einen Motorschaden durch Überhitzung zu vermeiden.
Für Roller, Motorräder und Mofas gibt es Reparatursätze für die original Wasserpumpe, aber auch Wasserpumpen mit erhöhtem Durchfluss (für getunte Motoren oder für intensiven Rennsport Einsatz) sowie elektrische Wasserpumpen.
Elektrische Wasserpumpen sind vor allem bei Tunern sehr beliebt, da sie ein mechanisch angetriebenes Element eliminieren und so den Motor von einer zusätzlichen Belastung befreien, was zu einer leichten Leistungssteigerung führt.
| Water Pump high flow Stage6 Black Derbi Euro 3 and Euro 4 | |
|---|---|
| Artikel-Nr. | S6-SSP593/BK |
| EAN | 4051272023873 |
| Gewicht | 0,15 kg |
| Brand | Stage6 |
| Product type | Water pump |
| Colour | Black |
Ersatzteile
- Stage6
Radiator Fluid / Coolant -38°C Stage6 1L Orange12,00 €12,00 € / 1000 mlIn stock - Stage6
Water Pump Shaft Stage6 Derbi Euro 3 / Euro 43,30 €In stock - Stage6
Water Pump Impeller Stage6 Derbi Euro 3 / Euro 432,50 €In stockRRP35,50 €-8% Discount - Stage6
Water Pump Gaskets Stage6 Derbi Euro 3 / Euro 43,80 €In stock