Water Pump high flow with cover Stage6 R/T Red Derbi Euro 3 / Euro 4
Beschreibung
Stage6 R/T water pump with increased flow rate plus cover for Derbi
Water pump with extra high flow rate from Stage6 for Derbi Euro 3 and Euro 4 - improves cooling if you want to continue using a mechanical water pump.
Stage6 R/T high-flow water pump
Avoiding an overheated engine is particularly important for tuned 50cc engines. Installing the Stage6 high flow water pump for Derbi can significantly improve the engine's cooling system.
The water pump kit contains a colored anodized spacer for the cover, a drive shaft, an oversize impeller, a CNC water pump cover, O-rings and screws.
The base plate for the cover is available in different colors, so that you can upgrade your motorcycle not only in terms of performance, but also visually.
Advantages Stage6 water pump with high flow rate:
- Less maintenance: high-precision machined stainless steel water pump shaft = Longer service life than OEM part as it is not affected by corrosion.
- Increased cooling capacity: Oversized, CNC-machined and anodized impeller to increase cooling volume, which is absolutely essential for the small radiators typically installed on 50cc bikes.
Individual customizing: CNC-milled and colour-anodized base plate for perfect color customizing.
- Perfect seal: The O-rings ensure a perfect seal; no paper gasket or sealant is required.
the extra Add-on: Stage6 R/T water pump cover
Better cooling: The inner contour optimized for the oversize impeller improves the cooling performance compared to the original cover.
Improved appearance: The precision-machined CNC cover with beautiful R/T logo is much more visually appealing than the cast OEM part.
Installation stage6 water pump with extra high flow Derbi E3 / E4
Installing the Stage6 water pump for Derbi is very easy: First drain the coolant, remove the cover of the original water pump and the impeller. You should also check the condition of the water pump seal and replace it if necessary.
During installation, insert the water pump shaft with the Stage6 impeller, insert the base plate for the cover with O-rings and fit the Stage6 R/T water pump cover. Then connect the Derbi radiator hoses and bleed the cooling system. We recommend replacing the old coolant with new one.
Details Water pump with cover Stage6 for Derbi :
- Base plate for cover: Red
- Water pump cover: Black
- Supplied with screws and seals required for installation
- For Derbi Euro 3
- For Derbi Euro 4
Wasserpumpe für Motorrad und Roller
Die Wasserpumpe ist ein entscheidender Bestandteil eines wassergekühlten Motors. Sie sorgt dafür, dass das Kühlwasser zwischen Motor und Kühler zirkuliert, um einen Motorschaden durch Überhitzung zu vermeiden.
Für Roller, Motorräder und Mofas gibt es Reparatursätze für die original Wasserpumpe, aber auch Wasserpumpen mit erhöhtem Durchfluss (für getunte Motoren oder für intensiven Rennsport Einsatz) sowie elektrische Wasserpumpen.
Elektrische Wasserpumpen sind vor allem bei Tunern sehr beliebt, da sie ein mechanisch angetriebenes Element eliminieren und so den Motor von einer zusätzlichen Belastung befreien, was zu einer leichten Leistungssteigerung führt.
| Water Pump high flow with cover Stage6 R/T Red Derbi Euro 3 / Euro 4 | |
|---|---|
| Artikel-Nr. | S6-SSP593WP/RE |
| EAN | 4051272024641 |
| Gewicht | 0,25 kg |
| Brand | Stage6 R/T |
| Product type | Water pump |
| Colour | Red |
Ersatzteile
- Stage6
Radiator Fluid / Coolant -38°C Stage6 1L Orange12,00 €12,00 € / 1000 mlIn stock - Stage6
Water Pump Shaft Stage6 Derbi Euro 3 / Euro 43,30 €In stock - Stage6
Water Pump Impeller Stage6 Derbi Euro 3 / Euro 432,50 €In stockRRP35,50 €-8% Discount - Stage6
Water Pump Gaskets Stage6 Derbi Euro 3 / Euro 43,80 €In stock