Water Pump high flow Stage6 turquoise AM6

Stage6 water pump with increased flow AM6 turquoise

Water pump with extra high flow rate from Stage6 for Minarelli AM6 - improves cooling if you want to continue using a mechanical water pump.

Stage6 water pump with extra high flow rate

Avoiding an overheated engine is particularly important for tuned 50cc engines. Installing the Stage6 high flow water pump for Derbi can significantly improve the engine's cooling system.

The water pump kit contains a colored anodized spacer for the cover, a drive shaft, an oversize impeller, O-rings and screws.

The base plate for the cover is available in different colors, so that you can upgrade your motorcycle not only in terms of performance, but also visually.

Benefits of Stage6 water pump with increased flow rate:

• Less maintenance: high-precision machined stainless steel water pump shaft = Longer service life than OEM part as it is not affected by corrosion.
• Increased cooling capacity: Oversized, CNC-machined and anodized impeller to increase cooling volume, which is absolutely essential for the small radiators typically installed on 50cc bikes.

• Individual customizing: CNC-milled and colour-anodized base plate for perfect color customizing.

• Perfect seal: The O-rings ensure a perfect seal; no paper gasket or sealant is required.

Installation stage6 water pump with extra high flow AM6

Installing the Stage6 water pump for AM6 is very easy: First drain the coolant, remove the cover of the original water pump and the impeller. You should also check the condition of the water pump seal and replace it if necessary.

During installation, insert the water pump shaft with the Stage6 impeller, insert the base plate for the cover with O-rings and fit the water pump cover (original or Stage6). Then connect the AM6 radiator hoses and bleed the cooling system. We recommend replacing the old coolant with new coolant.

You have two options for the water pump cover:

• Use the original AM6 water pump cover
• Use the Stage6 R/T water pump cover made of CNC aluminum to improve cooling even more

Details Water pump Stage6 AM6:

• Base plate for the cover: Turquoise
• Supplied with the screws and O-rings required for installation
• For Minarelli AM6 engine
• For 50cc motorcycles Rieju MRT, Beta RR, Yamaha DT 50, Fantic XM 50, Sherco 50 and many other models