Description
clutch Stage6 Sport Pro 107mm
The Stage6 Sport Pro is a scooter clutch for all models with a 107mm clutch. It fits Minarelli, Piaggio, Peugeot, Honda, Kymco, Sym and 4-stroke scooters made in China (GY6 50cc).
ATTENTION: Minarelli (Aprilia, Yamaha, MBK, …) engines have different clutches since 1998. Please check whether your original clutch has 2 jaws (d = 105mm) or 3 jaws (d = 107mm). You can also measure the inside diameter of the clutch bell, which should be 107 mm. If the diameter is 105 mm, you can easily convert to a 107 mm clutch by installing a 107 mm clutch bell!
Please note:
The supplied guiding seat for the contra spring should only be used for Minarelli engines (Aerox/Malaguti/China 2T). This is not necessary for Peugeot, Piaggio and GY6 4-stroke engines.
What are the benefits of a tuning clutch?
The three-jaw clutch can be adjusted using clutch springs in different strengths and two detent points. In contrast to the original clutch, you can change the point where the clutch engages and make it fit your individual setup, i.e. the engine engages later. A reinforced clutch ring and forged and bolted pins support the reinforced clutch linings. Conventional clutches only have riveted pins, which are prone to failure.
The Stage6 SportPRO is an inexpensive alternative to the well-known sports clutches. For very powerful engines, we recommend using the Stage6 Torque Control.
Details Stage6 Sport PRO clutch:
- Diameter 107 mm
- Including 1x set of medium clutch springs
