Description
Shock Absorber Stage6 R/T Replica Piaggio
Shock Absorber Stage6 R/T Replica Piaggio – the more affordable “smaller” version of the Stage6 R/T High-Low shock.
Spring preload can be adjusted via a knurled nut, and rebound damping can be adjusted at the lower mount. The shock absorber was developed for sporty road use but can also be used for racing.
The Replica shock also stands out visually, with a pure racing look with orange anodized details.
The shock absorber length is 310 mm and is used on many Piaggio / Gilera / Aprilia / Vespa scooters. To ensure the shock fits your scooter, check the length of the original shock.
Details R/T Replica Shock Piaggio
- Adjustable spring preload
- Adjustable rebound damping
- Spring rate: 115LB
- Length: 310mm
- Top mount: M8 threaded stud
- Bottom mount width: 34mm
Note: This shock absorber only fits models with Piaggio engine (bottom mount 34mm / top mount M8 threaded stud).
How to find the right shock absorber?
In general, all shock absorbers for 50cc scooters are very similar and have a 20mm wide mount at the bottom and a 10mm diameter “eye” at the top. Scooters with Piaggio engines have a 34mm wide mount at the bottom and a threaded stud at the top. There are exceptions.
Please check the dimensions on your vehicle. The shock absorber length can be adjusted by 2–3 cm to adapt seat height or handling as preferred. A longer shock absorber allows slightly sportier handling.
