You are here:

STAGE6 INTAKE

SPECIAL PRODUCTS FOR EVERY APPLICATION

STAGE6

INTAKE KIT MKII

Complete intake system from Stage6, revised with new Stage6 SportPro (NBR) reed valve. The kit includes a polymer-coated intake manifold with oil and vacuum port and a vulcanized reed valve.

Equipped with a large 2-reed valve, which in conjunction with 19mm and larger carburetors will optimize cylinder filling which is a basic requirement for engine performance. The rubber flange of the intake manifold is replaceable so you can switch to larger carburetors like Stage6 flat slide/Keihin PWK, Stage6/Mikuni TM24 or KOSO 28mm.

The supplied adapter fits all Dellorto 10-21mm and Arreche 17-21mm.

Händler Finden

STAGE6

VFORCE3 / FKM REED VALVE & REED VALVE SPACER

Stage6 bietet ein Komplettsortiment rund um den Membranblock: hochwertige FKM reed valves, VForce3 Racing reed valves and CNC reed valve spacers in Black and Orange.

VForce3 –high prformance reed valves developed in close collaboration with American manufacturer Moto Tassinari. The flow- and passage-optimized as well as patented design of the double-V-valve results in a significantly better filling of the crankcase, by almost doubling the inlet cross-section.

The FKM reed valves are vulcanized dual-reed valves that result in improved cylinder filling, especially in setups with larger carburetors. The kit includes the reed valve made of fuel-resistant Viton® as well as 0.35mm Stage6 carbon petals, three venturi stuffers (24, 26, 28mm) depending on the engine variant, and a set of 0.40mm fiber reeds.

The stylish CNC-machined aluminum spacers fit perfectly under the reed valve and optimize engine performance. The extended intake tract results in more total volume and better flushing of the boost ports. Available for Derbi and Minarelli AM6 engines, 5mm, 10mm thick and with 5° angle.

Händler Finden

STAGE6 R/T

HIGHFLOW INTAKE KIT

Stage6 assembled three High-End Intake Systems for Derbi and Minarelli AM6. The kits are designed for 70cc – 90cc setups (Sport / Racing / High-End) and include

  • Stage6 R/T High Flow Intake Manifold 28mm / 34mm in Black or Orange
  • 5mm or 10mm Stage6 R/T Reed Valve Spacer
  • Stage6 Viton or VForce3 Reed Valve
  • Stage6 Pod Air Filter White or Red
  • Carburetor

Depending on the kit, it is a Dell’Orto PHBG 21mm, a Stage6 R/T PWK 28mm or a Stage6 R/T MK 2 34mm carburetor.

In terms of performance, the High Flow Kit has considerable advantages: Gas flow is improved and the better, unobstructed placement of the air filter improves air intake. This results in stable, improved acceleration and better overall performance.

Händler Finden

STAGE6 R/T

HIGHFLOW / VITON INTAKE MANIFOLD & SPACER

The intake manifold is an important element of the intake, and Stage6 offers you various tuning parts to improve the intake: Intake manifolds made from high-quality Viton, perfectly matched intake manifolds and spacers and 4 variants of the HighFlow intake manifold.

The Stage6 R/T High-Flow intake system has a few decisive advantages: the transitions and the course in the intake spacer have been optimized so that hard edges are completely avoided. This improves the flow, which in turn leads to higher performance.

The CNC machined HighFlow intake manifolds for Derbi and Minarelli AM6 are available in 4 variants, each in black and orange. The intake manifolds are slightly wedge-shaped to allow the use of a larger carburetor. The standard versions in 28mm and 34mm are supplied with round and tapered inserts, respectively, and are universally applicable. The Ellipse variants, also 28mm and 34mm, come with an elliptical shaped insert that fits perfectly on the Stage6 R/T reed block and Stage6 VForce3 reed block.

The Stage6 Viton intake manifolds for Piaggio are extremely resistant to fuels and heat. Even gasoline with a high alcohol content cannot harm these FKM intake manifolds. The extra soft design absorbs vibrations from the motor and reduces foaming and spillage. The extra-short version leads to better responsiveness, and the intake revs are moved even higher.

The combination of CNC-milled intake spacer and high-quality and very stable cFKM (Viton®) carb adapter allows direct mounting of Stage6-R/T-VHST and flat-slide carburetors in the direction of the rear wheel, without the carburetor being too slanted and tending to overflow.

Händler finden