Description
Stage6 R/T Racing front and rear brake disc
Stage6 is always looking for ways to optimise products for road and race use, and since brakes are pretty important they improved their brake discs as well.
When developing the Stage6 R/T 190mm floating front/rear brake disc for Yamaha Aerox, the focus was on highest reliability and maximum braking power. The result is a high-end brake disc suitable for racing use, but that can of course also be used for everyday road use.
The brake disc is 100% made in Italy and has been tested under real conditions on the race track. It is completely made of high-quality martensitic steel. This type of steel has a high carbon and chromium content, the main advantage is its superior toughness and hardness, which guarantees an extended service life.
The heat treatment of the braking surface is the same as that used on superbikes, so when competing in circuit races pilots can brake consistently and powerfully throughout the entire race.
The competitive advantage of the Stage6 floater design is that the floaters have 30% more contact or working surface compared to conventional floaters. The braking force is thus distributed about 30% more evenly than with normal floating discs, resulting in better brake response. Due to the increased contact area, floaters and brake discs are more durable and resistant to boot.
The brake disc is equipped with anodized orange floaters made of 7075 T6 aluminium, whose strength is comparable to steel but weighs much less.
Advantages of the Stage6 floating brake discs:
- increased, constant braking power even under extreme conditions
- excellent heat distribution and limited expansion and distortion at high temperatures
- reduced pad wear
- improved handling and bite when braking in corners
For optimum performance, we recommend fitting a new pair of brake pads when mounting your new Stage6 disc.
Technical data :
- Outside diameter: 190 mm
- Inner diameter: 58.5 mm
- 3 holes
- Hole diameter 10.5 mm
- Disc thickness 4mm
- For Yamaha Aerox / Jog / Malaguti F12 / Aprilia SR50 and many others
Note : For brake discs measuring 190mm outside / 58mm inside with 3 holes, there are 3 different types with different screws:
– 10mm flat-head screw
– 8mm flat-head screw
– 8mm countersunk screw
Stage6 designed this disc so that it can be used for all 3 versions. If your vehicle uses 10mm screws (Yamaha Aerox …), you can use the original screws and do a plug & play installation. Using the special screws supplied with the disc, you can also fit it on all models with 8mm screws (Aprilia SR50, Piaggio NRG, Typhoon, Malaguti F12, F15, MBK Mach G, Yamaha Jog and etc.).
