Peugeot Speedfight 3

The Peugeot Speedfight 3 by Stage6 is a purebred racing scooter. The 2-stroke bike definitely looks like a racer with the original bodywork being covered with Stage6 racing decals.

The chassis is pure racing as well. An MBK Nitro aluminium triple tree and two adjustable black Stage6 Racing fork tubes make up the front part of the frame. At the rear, a Stage6 R/T High-Low shock absorber connects the lower engine to the frame.

The front brake consists of a Stage6 MKII 280mm brake disc and an anodized orange Stage6 R/T 4-piston radial-mount caliper. At the rear, we decided to keep the original brake disc. The original rims are fitted with Stage6 racing slicks, type 130/60/13 60P.

To get maximum performance, the Speedfight 3 was equipped exclusively with high-end tuning parts. We mounted a Stage6 R/T 70cc MKI cylinder kit and a Stage6 R/T crankshaft with 85mm stroke on the modified  Peugeot vertical LC engine.

The intake system consists of a Stage6 Viton reed valve, a short Stage6 R/T intake with spacer and 28mm manifold and a Stage6 R/T VHST 28mm carburetor.

A Stage6 R/T 70cc exhaust enhances the already outstanding output. The digital inner rotor ignition is also by Stage6.

The transmission of power is handled by a Stage6 R/T Oversize variator, a Stage6 Racing Torque Control MK II clutch and a Stage6 R/T 479g clutch bell.

23.5 hp
0-100 km/h
5.2 sec
Top Speed
130 km/h
Racing circuit

After several adjustment, the Speedfight 3 made 23.9 hp at 13,900 rpm on the test bench. It reaches 100 km/h in only 5.2 seconds. Maximum speed is 130 km/h.